Description
The Inteli AIN8 is an extension module developed by ComAp to augment the analog input capabilities of compatible controllers, such as InteliSys NT, InteliGen NT, InteliMains NT, and InteliDrive DCU. This module provides additional analog input channels and an impulse/RPM input, facilitating comprehensive monitoring and control of various parameters.
Key Functions:
- Analog Input Channels: Offers eight configurable analog input channels that support various sensor types, including:
- Resistor 3-wire inputs: Compatible with resistors ranging from 0-250Ω, 0-2400Ω, to 0-10kΩ, and temperature sensors like Pt100, Pt1000, Ni100, and Ni1000.
- Current inputs: Accommodates active or passive sensors with ranges of ±20mA, 0-20mA, and 4-20mA.
- Voltage inputs: Supports voltage measurements of ±1V, 0-2.4V, 0-5V, and 0-10V, including compatibility with lambda probes.
- Impulse/RPM Input: Includes an input capable of measuring RPM pulses with frequencies ranging from 4Hz to 10kHz, allowing for accurate monitoring of engine speed or processing pulses from devices like electrometers and flowmeters.
Applications:
- Enhanced Monitoring: Expands the monitoring capabilities of compatible controllers by providing additional analog inputs for various sensors, enabling detailed supervision of engine parameters, environmental conditions, or system performance metrics.
- Engine Speed Measurement: Utilizes the impulse/RPM input to accurately measure engine speed, essential for applications requiring precise RPM monitoring and control.
- Resource Consumption Tracking: Processes pulses from devices such as electrometers and flowmeters, facilitating the measurement of total consumption and average fuel consumption, which is vital for optimizing operational efficiency and resource management.
By integrating the Inteli AIN8 module, users can significantly enhance the data acquisition and monitoring capabilities of their control systems, leading to improved operational oversight and efficiency.
Analog / Sensor Expansion
| Module | Function | Typical Compatibility | Applicable Controllers |
|---|---|---|---|
| Inteli AIN8TC | 8 thermocouple inputs for accurate temperature measurement. | Designed for InteliLite, InteliGen 200, InteliSys NT, InteliGen NT, InteliMains NT, InteliDrive DCU. | InteliLite controllers (including 4 series) that support CAN I/O expansion — check firmware & slot support. |
| Inteli DC4/4 | DC voltage and current measurement module (analogue transducer). | Used with various ComAp controllers; broadly compatible where analogue expansion is supported. | Likely works with InteliLite 4 family if controller supports DC measurement inputs via extension modules (firmware/configuration required). |
| (Other possible analog modules, e.g., AIN8, AIO9/1, I‑AOUT8) | Additional analogue input and output channels (varies by module type) | Module line generally compatible across COMAP platforms | Specific controller support must be verified in InteliLite 4 accessory documentation — often supported via CAN. |
Reviews
There are no reviews yet.